FLIR E96-24-42 - Calibrating the Lens-Camera Combination; Introduction

Handling the camera
7
7. Make sure that the two index marks are aligned, indicating that the lens is locked in
place.
7.16 Calibrating the lens–camera combination
Applicability: Camera models with an exchangeable lens.
7.16.1 Introduction
Before a new lens can be used with the camera, the lens–camera combination must be
calibrated.
This is a process that previously had to be performed by a FLIR service department, but
for the FLIR Exx series the calibration can be performed by the user. This feature is
called AutoCal. The AutoCal procedure requires a calibration target, which is included in
the lens package.
Note For lenses that ship with the camera, the lens–camera combination is factory
calibrated.
#T810587; r. AD/90967/90989; en-US
53