Table of Figures
Figure 5-22: Vapor Mode inlet adapter 41
Figure 5-23: Presenting the Vapor Mode inlet adapter 41
Figure 5-24: Preparing to Verify screen in Vapor Detection Mode 41
Figure 5-25: Selecting a vapor detection method 42
Figure 5-26: Sample information screen: No threat detected 43
Figure 5-27: Sample information screen: Threat detected 44
Figure 5-28: Spectrogram of a sample analysis 45
Figure 5-29: Flagged sample record 45
Figure 5-30:Threat details displayed by IDcommand 46
Figure 6-1: Navigating to the File Archive menu 47
Figure 6-2: File Archive menu 47
Figure 6-3: Selecting a sample record 48
Figure 6-4: Choose Report menu 48
Figure 6-5: Report generation in progress 49
Figure 6-6: Summary report 50
Figure 8-1: Dot (enlarged) on sensing element marks the area safe for handling 53
Figure 8-2: Opening the sensing element compartment (1) 54
Figure 8-3: Opening the sensing element compartment (2) 54
Figure 8-4: Accessing the sensing element 55
Figure 8-5: Sensing element in place 55
Figure 8-6: Selecting the sensing element type 56
Figure 8-7: Squeeze tabs to loosen TD 58
Figure 8-8: Attaching the TD 58
Figure 8-9: Inlet tool 59
Figure 8-10: Clean System menu 60
Figure 8-11: Cleaning adapter 61
68 4226044 (Rev. C) © 2020 FLIR Systems, Inc.
To Next Page
Loading...