Menu Definitions
Access the menus by selecting the "Menu" icon.
Service
The "Service" menu contains commands for:
1. Self Test,
2. Edit Pass (to edit the password),
3. Status, and,
4. BT Log.
Self Test Clicking the checkmark displays a blank form
titled "Self Test" and containing "Display", "LED's",
Vibrator", and "Buzzer".
Selecting the checkmark a second time, ini-
tiates the test.
The FLIR identiFINDER R200 then cycles through
each one, testing the functionality (the screen
flashes, along with the LEDs and the indicators
(vibrator and buzzer) will alert.
Edit Pass
Edit the Password
By selecting "Set Pass", the screen will then display
options for "Set Pass" and "Clr Pass".
Selecting "Edit Pass" displays "Set Password" with
seven spaced defined. Passwords consist of a com-
bination of the left, right, and center thumbpad but-
tons which correspond to the "Left", "Up"and
"Right" icons
( , , ) and the passwords may con-
sist of seven characters using any combination of
these three icons.
To Next Page
Loading...
