2.2.4 Passwords
Clear Stored Data
l Clr Spectra (clears stored Spectra)
l Returns the prompt "Erase all Spectra ?"
l The "circled checkmark" confirms, and the
circled "X"
cancels this operation and
returns to the previous screen
l Clr Alarms (clears stored alarms)
l Returns the prompt "Erase all Alarms ?"
l
confirms, and cancels this oper-
ation and returns to the previous screen.
l Clr Scrns (clears stored screencaps)
l Returns the prompt "Erase all Screens ?"
2.2.4 Passwords
The factory password uses the keys on the thumbpad and is preset to 〈 ‸ 〉 〈 ‸ 〉 〈
(Left, Up, Right, Left, Up, Right, Left).
FLIR can not decode passwords at the factory, so it is important that pass-
words are retained by the user.
If it becomes necessary to lock the instrument (setting the menus to a
"locked"status - which requires a re-entry of the password to access them),
press and hold the Power button while briefly pressing the "Right" but-
ton.
R200 3/10/2017__1:38 PM 2–43
To Next Page
Loading...
