FLIR identiFINDER R200 - 2.6 Resetting Values to Factory Presets

2.5 Shut Down
expressed in micro- (μ) rem's (Roentgen equivalent man*) per hour (h) .
The Taskbar displays command icons for "Finder Background" (
displays command icons for "Finder Background" (
),
"identification" (
"identification" (
), and the menu tree (
), and the menu tree (
).
*Roentgen equivalent man is the dose equivalent , or effective dose of radiation
deposited in human tissue.
The physical buttons, located on the thumb-pad, correspond to the com-
mands on the taskbar, with the left-most button (-) executing the left-most
command on the taskbar, the center button executing the center com-
mand (icon), and the right-most (-) executes the command located in the
far-right portion of the task bar (in the "Dose Rate" display example, the
menu tree ( ).
2.5 Shut Down
Press and hold the Power Button to turn the FLIR identiFINDER R200 to "OFF".
2.6 Resetting Values to Factory Presets
To reset the FLIR identiFINDER R200 to the factory pre-sets, select the command in the "Data" menu list.
R200 3/10/2017__1:38 PM 2–47