Navigation
Settings (choices)
Value Sets (threshold)
(numeric pick list; scroll for choice setpoint, eg., >3.9< for Alrm(σ),
or >1000< for Alrm (μr)
/ "Alrm Thrsh" / "DR Thrsh"
Wrn (μr/h)
-or- Alrm (μr/h)
/ "Alrm Thrsh" / "Dose Thrsh"
Wrn (μr)
-or- Alrm (μr)
/ "Alrm Thrsh" / "σ Thrsh" Alrm(σ)
For a detector overload, move the FLIR identiFINDER R200 to a location with lower radiation to
clear it.
This condition is displayed on the screen.
It is recommended as an imperative that users retreat immediately from environments with radiation
that high.
4.1.1 Overload Condition
For overload conditions, the following screens display:
Overload Condition R200 displays the following screens:
When the source approaches the over-
load threshold:
The overload
condition clears when the
R200 is moved away from
the high energy source.
Overload Condition
It is recommended as an imperative that users retreat immediately from environments with radiation
that high.
4 - 61 R200 3/10/2017__1:38 PM
To Next Page
Loading...
