FLIR identiFINDER R200 - ID Options

ID Options
ID Options
From this page,the following settings are available in the FLIR identiFINDER R200:
l Selecting AutoMode (select box turns it "ON"; clearing it turns AutoMode "OFF",
l Int. Time - Integration time (allotment for "Identify" mode to collect data),
l Ex. Time - Extended time (allotment for extension in "Identify" mode for data collection),
l Results-Confidnce - Results confidence (on, or off),
l Results-Severity - Severity (on, or off),
l Results-Usage (on, or off),
l Dynamic (on, or off).
Figure 7-2 The Radiation "ID Options" page in the FLIR identiFINDER R200 Web Interface.
7-81 R200 3/10/2017__1:38 PM