FLIR identiFINDER R300 - Bluetooth SPP Settings; Bluetooth SPP

6.23. Bluetooth FLIR Detection
This screen (Figure 152, p. 142) shows if the Bluetooth SPP mode is enabled and whether the FLIR
identiFINDER R300 is currently Discoverable.
Figure 152. Bluetooth SPP
Settings and Commands
Status
Indicates whether Enable SPP (see 6.23.2, p. 142) is set to On (Enabled) or Off (Disabled) .
Discoverable
Indicates if the FLIR identiFINDER R300 is currently discoverable or not discoverable via
Bluetooth in SPP Mode.
Settings
View and change the Bluetooth SPP Mode settings.
Exit
Return to the superior menu.
6.23.2 Bluetooth SPP Settings
This item is available for FLIR identiFINDER R300 variants with Bluetooth (see A.1, p. 237).
Options Menu (p. 103) ä More Options (p. 103) ä Bluetooth SPP (p. 104) ä Bluetooth SPP Status (p. 141) ä Bluetooth SPP Settings
Settings (p. 180) ä Bluetooth SPP Settings (p. 192) ä Bluetooth SPP Settings (p. 192)
This screen (Figure 153, p. 143) allows you to conigure the FLIR identiFINDER R300 Bluetooth
Serial Port Protocol mode.
142 identiFINDER
®
R300/en/2014.4(13623)/Feb2015