6.23. Bluetooth FLIR Detection
9. If your device requires a PIN entry, use the PIN shown on your FLIR identiFINDER R300
screen (Figure 161, p. 148).
Figure 161. Pairing with a Bluetooth device
10. The FLIR identiFINDER R300 shows some information about the Bluetooth device after
a successful pairing (Figure 162, p. 148).
Figure 162. Paired to a Bluetooth device
An error message (Figure 163, p. 149) is displayed if pairing failed. Make sure the
Bluetooth device is correctly conigured, still in the vicinity, and try again.
Your FLIR identiFINDER R300 is now ready to communicate via the Bluetooth device.
Make sure not to move the Bluetooth device more than about 10 m (33 ft) away from the
FLIR identiFINDER R300.
Down , Select
Choose and select menu items, see 2.2.2, p. 35 for details.
148 identiFINDER
®
R300/en/2014.4(13623)/Feb2015
To Next Page
Loading...
