FLIR identiFINDER R300 - Changing Combined Values: Changing the Selected Component; Changing Composite Values; Changing Values: Changed Setting Accepted

2.2. The FLIR identiFINDER R300 Keys FLIR Detection
Chosen
Item
Item
Item
Changed
Value Accepted
D
own, Select
Figure 22. Changing Values: Changed setting accepted
Pressing I for a moment also cancels editing.
Do not press I for too long. That would power down your FLIR identiFINDER R300.
2.2.4 Changing Composite Values
Some values are combinations of several components. Calendar dates for example, have year,
month, and day components or clock settings have hour and minute components.
Several commands (Figure 12, p. 35) are available if you
Select (see 2.2.3, p. 37) such values for
editing. Always one of the value’s components is selected (Figure 23, p. 40), that is, editing com-
mands are applied to this component.
S
elected Entry Field
S
elected Component
Incr
ease Component
R
evealMoreCommands
evealMoreCommands
evealMoreCommands
Figure 23. Changing Combined Values: Changing the selected component
40 identiFINDER
®
R300/en/2014.4(13623)/Feb2015