FLIR identiFINDER R300 - Editing Text: after Changing the Selected O to an A; Editing Text: Next Character to the Right Is Selected (O); Editing Text: Set of Available Characters

2.2. The FLIR identiFINDER R300 Keys FLIR Detection
S
elected Entry Field
S
elected Character
S
elect Next Character
R
evealMoreCommands
evealMoreCommands
evealMoreCommands
Figure 28. Editing Text: Next character to the right is selected (“o”).
For the selected character (Figure 30, p. 44), you can use the commands + and - to cycle through
the available characters in the sequence shown in Figure 29, p. 44.
Use the web interface (see 8, p. 179) to enter international characters like æ, î, ö, ñ, ß, ëtç.
!”§$%&/()[]{}=?*+#’-_@.:,;
0123456789
(Space)
abcdefghijklmnopqrstuvwxyz
ABCDEFGHIJKLMNOPQRSTUVWXYZ
Figure 29. Editing Text: Set of available characters
S
elected Entry Field
S
elected Character
Change
Selected
Character
R
evealMoreCommands
evealMoreCommands
evealMoreCommands
Figure 30. Editing Text: After changing the selected “o” to an “a”.
To delete the selected character use Delete (Figure 31, p. 45).
44 identiFINDER
®
R300/en/2014.4(13623)/Feb2015