FLIR identiFINDER R300 - Identi Ication Mode: Progress Display During Count Limited Data Acquisition; Identi Ication Mode: Identi Ication was Not Possible

4.3. Identication Mode FLIR Detection
B
est Range
S
chematic Count Rate
Indicator
Curr
ent Count Rate
ent Count Rate
ent Count Rate
C
urrent Count Rate
Curr
ent Dose Rate
ent Dose Rate
ent Dose Rate
D
uration
uration
uration
D
ead Time Relative to
Passed Duration
R
egisteredCounts
Figure 94. Identiication Mode: Progress display during count limited data acquisition
R
eference Number of
the Saved Record
Figure 95. Identiication Mode: Identiication was not possible.
Start
Start the identiication measurement.
Skip
Cycle the list of commands (see 2.2.1, p. 35).
Send
Go to Send Identication (see 6.21, p. 137) avoiding the detour around the normal options
menu hierarchy. The current identiication will be already chosen for sending.
Exit
Return to the previous mode.
92 identiFINDER
®
R300/en/2014.4(13623)/Feb2015