8.8 Saving an image
General
Depending on your camera model, you can save one image or many images to the
camera memory, or on the SD Memory Card.
Naming
convention
The naming convention for images is IR_xxxx.jpg, where xxxx is a unique counter.
When you select Restore default the camera resets the counter and assigns the first
highest free file name for the new file.
Figure
10601503;a1
Procedure
Pull and release the bottom trigger to save one image to the camera memory, or SD
Memory Card (depending on camera model).
8
34 Publ. No. 1558299 Rev. a200 – ENGLISH (EN) – February 12, 2007
8 – Operating the camera
To Next Page
Loading...
