8.11 Measuring a temperature using a spot meter
General
You can measure the temperature using a fixed spot meter in the middle of the screen.
Procedure
Follow this procedure to measure the temperature using a fixed spot meter:
To display the main menu, push Menu.1
To select , push the navigation pad up/down.
2
To enable the menu, push Select.3
To select Temperature, push the navigation pad up/down.4
To save the changes and close the menu, push Close.5
Point the camera at the object you want to measure. The temperature is
displayed in the top left corner of the screen.
6
NOTE
To display the temperature correctly, the circle in the middle of the spot meter must
be completely filled by the object.
8
Publ. No. 1558299 Rev. a200 – ENGLISH (EN) – February 12, 2007 41
8 – Operating the camera
To Next Page
Loading...
