8.12 Measuring a temperature using an area
NOTE
This feature may no be enabled in all camera models.
General
You can measure the minimum or maximum temperature using a fixed area in the
middle of the screen.
Procedure
Follow this procedure to measure the minimum or maximum temperature using a
fixed area:
To display the main menu, push Menu.1
To select , push the navigation pad up/down.
2
To enable the menu, push Select.3
Do one of the following:
■
To create an area for which the minimum temperature is indicated in the
top left corner of the screen, push the navigation pad up/down to select
Cold and push Select.
■
To create an area for which the maximum temperature is indicated in
the top left corner of the screen, push the navigation pad up/down to
select Hot and push Select.
4
Point the camera at the object you want to measure.5
8
42 Publ. No. 1558299 Rev. a200 – ENGLISH (EN) – February 12, 2007
8 – Operating the camera
To Next Page
Loading...
