8.16 Opening an image
General
When you save an image, you store the image in the camera memory, or on the SD
Memory Card, depending on your camera model.
To display the image again, you can open the image from the camera memory, or
SD Memory Card.
Procedure
Follow this procedure to open an image:
To open the image archive, push the camera/archive button.1
Do one of the following:
■
To find the image you want to open, push the navigation pad left/right.
■
To display thumbnails of all images, push Overview, and follow this
procedure:
1 To select the image you want to open, push the navigation pad
up/down or left/right.
2 To open the image, push Open.
2
To go back to live IR image, push the camera/archive button.3
8
48 Publ. No. 1558299 Rev. a200 – ENGLISH (EN) – February 12, 2007
8 – Operating the camera
To Next Page
Loading...
