Method 2
Follow this procedure to move images to a PC with ThermaCAM™ QuickReport:
To display the main menu, push Menu.1
To select , push the navigation pad up/down.
2
To enable the Settings menu, push Select.3
To select USB cable, push the navigation pad up/down.4
To select Network disk. push the navigation pad up/down.5
Click OK.6
Connect the camera to the computer according to ThermaCAM™ QuickRe-
port User’s manual, Publ. No. –.
7
See ThermaCAM™ QuickReport User’s manual, Publ. No. – for more instruc-
tions.
8
NOTE
When you select Network disk a help text is displayed in the camera. Read the help
text carefully.
SEE ALSO
For information about how to install and use ThermaCAM™ QuickReport, see Ther-
maCAM™ QuickReport User’s manual, Publ. No. –. FLIR Systems ships this manual
with your camera.
8
Publ. No. 1558299 Rev. a200 – ENGLISH (EN) – February 12, 2007 53
8 – Operating the camera
To Next Page
Loading...
