User Interface Menus
5
5.5 Measurement Menu
The Measurement Menu offers four sub-menus as described below.
Figure 5.11 Selecting the Measurement mode from the main menu
• No Measurements: Select this mode if you do not wish to see any meas-
urement values or icons on the display. Only the camera image will be seen
in this mode.
Figure 5.12 Selecting the ‘No Measurement’ mode from the main menu
• Center Spot (cross-hairs): Enable this mode to view the temperature
measurement of the targeted spot in the upper left hand corner of the dis-
play. Use the cross-hairs to target the measurement spot.
#NAS100005; r. AL/76939/76957; en-US
13
To Next Page
Loading...
