FLIR Quasar Gen III CP-6302 Series - Tampering Event Actions; Actions for Tampering Events

This document does not contain any export-controlled information.
Configuration and Operation
36
Quasar CP-6302 Range User Guide - Ver. 8 - January 31, 2021
Tampering Screen
Tampering Indication Bar
The Tampering Indication bar gives the user a visual display of the threshold for how much Tampering is
accruing. This indication bar will be effected by the sensitivity settings mentioned below.
Tampering Alarm
Four alarms are available. For each alarm, the Administrator can select from the following options:
· Select Off to disable an alarm.
· Select On to enable an alarm (default setting).
· Select By Schedule to set a schedule. Then click Please Select to select up to 10 schedules from
the drop-down list that opens. The selected schedules are displayed in the Please Select text
box. To set a schedule, open the Schedule tab.
Click SAVE after configuring the settings.
Tampering Duration
The minimum duration set for tampering indicates the amount of time tampering must take place before
the camera considers it a tampering event.
Sensitivity Setting
Setting the sensitivity [1-100] determines the amount of tampering that will trigger an event (i.e. how much
movement of the camera).
Triggered Action
The Administrator can specify various alarm actions to take when an alarm is triggered. See the
Triggered Actions section for a detailed description of the actions. The following options are available: