Flower House Hanging Pumpkin Chair User Manual

(4) Legs
(4) Rubber feet
(1) Lower Bow with X connection
(1) Upper Bow
(1) Main Chair C-Frame
(1) Bottom Flat Cushion
(1) Leisure Cushion
(3) Attachment Straps
(1) Wrench
(2) Allen Wrench
(10) Nuts and Bolts
(4) Wedges
(1) Lever Tool
Parts and Assembly Instructions for
Hanging Pumpkin Chairs
• PO Box 595 Clio, Michigan 48458 • Office: (810)-686-8252 • Fax: (810)-686-5492 • customerservice@flowerhouses.com •
Images are not to scale

Flower House Hanging Pumpkin Chair Specifications

General

Product Type	Hanging Chair
Shape	Pumpkin
Weight Capacity	250 lbs
Assembly Required	Yes
Recommended Location	Outdoor

Summary

Assembly Steps

Prepare Legs and Frame

Attach rubber feet to legs and connect them to the lower bow X-frame, then attach the upper bow.

Assemble Chair Frame

Open the chair frame, insert nuts and bolts, ensuring flat tops are on the inside.

Attach Hanging Straps

Slide center loop through top opening and connect hooks. Slide side strap O-rings over the center strap and pull taut.

Secure Chair and Add Cushions

Slide attachment strap over end cap. Place bottom flat cushion and then leisure cushion on the seat.

Lever Tool Assembly Assistance

Lever Tool Operation

Use the lever tool by placing its peg on the inside middle of the pan and pulling the straight bar to create clearance for bolts and wedges.

Installing Bolts and Wedges

Insert bolts, fasten with nuts, and place wedges between the outermost rib and bolt.