EasyManua.ls Logo

Flowzone CYCLONE 2 - Troubleshooting Guide; Common Sprayer Issues and Solutions

Flowzone CYCLONE 2
18 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
TROUBLESHOOTING
YOUR SPRAYER
PROBLEM POSSIBLE REASON(S) SOLUTION
Sprayer does not
turn on.
Battery is not charged. Charge battery.
Loose wire.
Contact FlowZone® Support at +1 (803)
339-2500 for service.
Leaks from tank area.
Input and/or output hose(s)
have a loose connection with
the pump.
Remove screws and remove the
plastic covering to expose pump.
Loosen clamps on both hoses,
position hose closer to pump and
re-tighten hose clamp.
Leaks from gun/nozzle
area.
Loose / damaged / broken
seal(s)
Inspect all seals and replace if
necessary.
Ball valve inside gun assembly
is defective
Contact FlowZone® at +1 (803) 339-
2500 for replacement part.
Clogged pump / hose /
gun / wand / nozzle.
Not rinsing tank / pump / hose
/ gun / nozzle(s) with cleaning
solution or water after use.
Rinse sprayer throughly with warm,
soapy water after each use.
Random part breaks. Wear and tear.
Contact FlowZone® at +1 (803) 339-
2500 for replacement parts
(see next page).
Pump runs constantly or
intermittently.
Pressure switch adjustment is
needed on the pump.
Contact FlowZone® Support at +1(803)
339-2500 for service.
1.
Copyright © WESSOL, LLC
7

Related product manuals