EasyManua.ls Logo

Flowzone CYCLONE 3 - Spraying: Preparing to Spray; Battery Charging and Status; Solution Preparation and Filling; Chemical Protective Gear

Flowzone CYCLONE 3
71 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
CYCLONE 3 OPERATION GUIDE
FZVAAJ-3
© WESSOL, LLC 2022
- 12 -
When using chemicals, always wear protective clothing, including respiratory
protection masks, gloves, eye protection, etc.
SPRAYING
Preparing to spray
1
Although the battery (7)
may be partially charged
upon delivery, it is
essential to fully charge
the battery prior to the rst
operation. An indicator
light should ash while the
battery is plugged in and
charging.
The charge level can be
viewed by activating the
indicator lights on the
battery by pressing on the
battery icon.
2
In a separate container,
prepare the solution
you want to spray
according to the
chemical manufacturers
instructions. Remove the
tank lid and carefully pour
the solution through the
tank strainer. Securely
tighten the tank lid.

Related product manuals