Determine which nozzle
is appropriate for your
project and connect
nozzle by pulling down
quick-connect on gun.
1. Short nozzle = adjustable, ranging from a jet
spray to a conical spray.
2. Extension wand = conical misting spray
STEP 2: Get started spraying.
Fully charge the battery prior to
first operation.
Fill the tank with pre-prepared
liquid through intake filter and
securely tighten tank cap.
Disengage handle lock and ON/OFF
switch and press down on the spray
gun trigger to begin spraying.
NOTE: Can spray continuously or on-command.
Connect coiled hose with on/off
switch end attached to spray gun &
other end connected to tank cap.
To Next Page
Loading...
