Flowzone TYPHOON 2 - Page 9

Fully charge the battery prior to rst operation.
NOTE: The ashing green light on charger indicates that
battery is charging when all lights stop ashing, the
battery is fully charged.
Fill the tank with pre-prepared liquid through
the intake lter and securely tighten the
tank cap.
NOTE: Always mix liquid solution in a separate
container.
Determine which nozzle is right for the job
& connect to spray wand by pulling down on
quick-connect and inserting nozzle.
a) Adjustable nozzle = ranges from jet stream to
conical stream
b) Fan nozzle = at 25º stream
c) Jet nozzle = narrow stream
Turn pump on by ipping switch on side of unit.
Flipping switch to “I” will activate PSI at 115 psi.
Meanwhile, “II” will activate at 70 psi.
Begin spraying by squeezing spray trigger.
1.
Preparing to spray:
STEP 2.
2.
3.
4.
5.
1.
2.
3.
4.
5.
a)
b)
c)
4
Copyright © WESSOL, LLC