Floyd Headboard - User Manual

Headboard

Summary

Product Components

Brackets

Quantity and illustration of the two required brackets for headboard attachment.

Headboard Panel

Quantity and illustration of the single headboard panel included in the kit.

Floyd Headboard Installation

Adding to Existing Floyd Bed

Specific instructions for users who already have a Floyd bed, involving strap and panel adjustments.

Step 1: Insert Brackets

Instructions for inserting the headboard brackets between bed panels, 2 inches from the ends.

Step 2: Tighten Fasteners

Guidance on hand-tightening the two fasteners located on the bottom of each headboard bracket.

Step 3: Secure Headboard Panel

Process for placing the headboard panel into the brackets and tightening fasteners to secure it.

Step 4: Re-tighten Strap

Final step to ensure the bed strap is taut by cranking the ratchet mechanism.

Safety and Support

Assembly and Usage Warnings

Critical warnings covering correct assembly, product usage, and safety precautions.

Contact and Support Information

Details for customer inquiries, the official website, and Floyd Shop physical location.

Overview

1. Function Description
2. Important Technical Specifications
3. Usage Features
4. Maintenance Features

This document describes the assembly and usage of the Floyd Headboard, designed to be used exclusively with the Floyd Platform Bed Frame. The headboard is an accessory that attaches to the bed frame to provide a backrest or decorative element.

Function Description:

The Floyd Headboard serves as an attachment to the Floyd Platform Bed Frame, enhancing its functionality and aesthetic. It provides a stable and secure backrest for users and integrates seamlessly with the existing bed structure. The headboard is designed for indoor use only and is not intended to be a standalone piece of furniture. Its primary function is to complement the Floyd Platform Bed Frame, offering an additional comfort and design element.

Important Technical Specifications:

The manual does not provide explicit technical specifications such as dimensions, weight, or materials. However, it implies certain structural characteristics through the assembly process:

• Components: The headboard system consists of one headboard panel and two brackets.
• Attachment Mechanism: The headboard attaches to the bed frame using brackets that are inserted between the bed panels. These brackets are secured with fasteners.
• Compatibility: Strictly designed for use with the Floyd Platform Bed Frame.
• Bracket Placement: Brackets should be placed 2 inches from the ends of the bed panels. For a king-sized Floyd bed headboard, the brackets are attached between the two outermost panels.

Usage Features:

The usage instructions emphasize safety and proper integration with the Floyd Platform Bed Frame:

• Assembly Process:
  1. Preparation (if adding to an existing Floyd bed): Loosen the strap on the bed frame by a few inches, separate the bed panels by a few inches. This involves pulling and compressing a release bar, opening a ratchet, and pulling the strap down until it loosens.
  2. Step 1: Insert the brackets: Place the two headboard brackets between the bed panels, ensuring they are 2 inches from the ends of the panels. For king beds, place them between the two outermost panels.
  3. Step 2: Tighten the fasteners: Hand-tighten the two fasteners located on the bottom of each headboard bracket.
  4. Step 3: Insert the headboard & tighten: Set the headboard panel into the brackets, aligning its ends with the bed platform. Then, tighten the fasteners on both brackets to secure the headboard panel in place.
  5. Step 4: Re-tighten the strap: Crank the bed frame's ratchet back and forth until the strap is taut. This step is crucial for holding everything in place and ensuring the stability of the entire bed system.
• Safety Precautions:
  • Only assemble as shown in the instructions.
  • Use extra precaution during assembly and have someone assist.
  • Do not change specifications or modify the product, as this can lead to product failure and personal injury.
  • Remove all packaging before first use.
  • Use only indoors.
  • Disassemble before moving the bed.
  • Do not sit on the top of the headboard panel.
  • Keep open flames, such as candles, away from the headboard panel.
  • Do not allow children to play with the product or its components.
  • Keep all packaging and parts away from children to prevent choking and suffocation risks.

Maintenance Features:

The manual highlights one key maintenance aspect to ensure the longevity and safety of the headboard:

• Regular Inspection: Inspect the metal brackets regularly for signs of wear.
• Replacement: Replace brackets if they are bent, rusted, deformed, or damaged. Failure to do so can result in unsafe conditions, product damage, or personal injury.

The Floyd Headboard is designed to be a durable and integrated addition to the Floyd Platform Bed Frame, emphasizing ease of assembly and user safety through clear instructions and warnings.

Floyd Headboard Specifications

General

Brand	Floyd
Model	Headboard
Category	Indoor Furnishing
Language	English