Need help?Do you have a question about the fluidra AQUABOT SUPER BRAVO and is the answer not in the manual?
Placing the power supply, uncoiling cable, locking handle, and submerging unit.
Detailed steps for plugging the cable into the power supply and turning the unit on.
Procedure for cleaning the filter bag after every cleaning cycle.
Instructions for removing debris from the pump propeller.
Methods for managing and untangling the unit's power cable.
Step-by-step guide for replacing worn PVA or PVC brushes.
Procedure for replacing stretched or worn drive belts.
Checks for power, cable connections, debris, and belt alignment.
Troubleshooting steps for slow pumping, including propeller and filter bag checks.
Diagnosing issues with obstructed motion, drive belts, or motor connections.
Checks for intake valve flap function and proper pool coverage.
Troubleshooting for bottom lid closure and intake valve issues.
Solutions for a twisted cable, including handle position and E-Z Swivel use.
General| Type | Robotic |
|---|---|
| Pool Type | In-ground |
| Weight | 9.5 kg |
| Power Supply | 24V DC |
| Cable Length | 15 m |
| Cleaning Cycle Time | 2.5 hours |
| Cleaning Area | Floor, Walls, and Waterline |
| Pool Size | Up to 50 sq m |
| Cleaning Time | 2.5 hours |
| Filtration | Fine |
| Warranty | 2 years |
| Cleaning Coverage | Full pool floor and walls |
To Next Page