Power Logger
Measuring Functions
21
Measurement
You can determine the instantaneous values and store them. You can also
record the values with the recorder function.
If you select this measurement mode the following display is shown:
edx026.bmp
21 Switch between the individual phases (detailed view: min- max-
values and distorted power and Energy values.
4 5 Switch between the representation modes:
- P, S and PF
- P, S and Q
- P, S and D
- P, S and EP
- P, S and EQ
- P, S and cosϕ
When 21 are pressed, the accumulated energy function becomes active, this
must be acknowledged by pressing RUN to activate the accumulation timer.
w ww . . co m
information@itm.com1.800.561.8187
To Next Page
Loading...
