Power Logger
Measuring Functions
25
Measurement
When selecting this measuring mode with the rotary switch the harmonics are
immediately and clearly represented on the LC display as follows:
edx030.bmp
21 Switch between the individual phases.
4 5 Switch between V and I.
Logging, Save/Enter, and Hold/Run functionality is explained earlier in this
manual.
By pressing CURSOR, you will go into Cursor mode, where you can read
additional values of the individual harmonics. With 4 5 you can select the
individual harmonics. Once the Cursor mode is activated, the scale can be
changed with the 21 from 100 %-50 % to 50 %-25 % or 10 %-5 %.
w ww . . co m
information@itm.com1.800.561.8187
To Next Page
Loading...
