Fluke 5520A - Output Commands

18
Command Summary (cont)
Output Commands
CFREQ? Returns the frequency for
capacitance modes.
DBMZ Sets the impedance used for
dBm outputs (ac volts).
DBMZ? Returns the impedance used
for dBm outputs (ac volts).
DC_OFFSET Applies dc offset to ac output.
DC_OFFSET? Returns the dc offset voltage.
DPF Sets displacement power
factor.
DPF? Returns displacement power
factor.
DUTY Sets squarewave duty cycle.
DUTY? Returns duty cycle.
FUNC? Returns output function.
HARMONIC Sets harmonic output.
HARMONIC? Returns harmonic location.
LCOMP Activates or deactivates
inductive load compensation
for ac current output.
LCOMP? Returns whether inductive load
compensation for ac current
output is active.
OPER Activates 5520A output.
OPER? Returns operate/standby
setting.
OUT Sets output and reference
point.
OUT? Returns output.