Fluke 5520A - Page 29

27
Command List (cont)
DBMZ_D?
Response: (Character) Z50, Z75, Z90, Z100,
Z135, Z150, Z300, Z600, Z900,
Z1000, or Z1200
DC_OFFSET
Parameters: Offset amplitude with optional
multiplier and voltage unit
DC_OFFSET?
Response: (Float) Signed offset amplitude
DPF
Parameters: 1. Cosine of phase offset (0.0 to 1.0)
2. (Optional) LEAD (default) or LAG
DPF?
Responses: 1. (Float) Cosine of phase offset
2. (Character) LEAD or LAG
DUTY
Parameter: Duty cycle percentage (.1 to 99.9)
DUTY?
Response: (Float) Duty cycle
EARTH
Parameter: OPEN or TIED
EARTH?
Response: (Character) OPEN or TIED
EDIT
Parameter: PRI, SEC. FREQ, or OFF
EDIT?
Response: (Character) PRI, SEC. FREQ, or
OFF
ERR?
Responses: 1. (Integer) Error code
2. (String) Error message string,
formatted for display
ERR_UNIT
Parameter: GT1000, GT100, GT10, PPM, or
PCT