A-1
Appendix A
Error Codes
0-Level Faults: Error handling
0 No Error
1 Error Queue Overflow
2 Bad ERR Channel
100-Level Faults: Self-calibration
100 Invalid Procedure Number
101 No Such Step In Procedure
102 No Cal/Diag Procedure Underway
103 Cal/Diag not Halted
104 No Cal Step To Which To Back Up
105 No Such Position For Range Under Cal
106 No Such Range For Cal Procedure
107 DAC %s Calibration Failed
108 Entered Reference Outside Of Limits
109 Measured And Entered Input Don't Match
110 Frequency Doesn't Match Expected
111 Input Is Of Wrong Polarity
112 Input Is Changing During Cal
113 Input Tripped Protection Circuit
114 Constant %s Out Of Limits
115 Flatness Constant Out Of Limits
116 Range Gain Constant Out Of Limits
117 Rough Gain Constant Out Of Limits
To Next Page
Loading...
