Fluke 5790B - Page 178

5790B
Operators Manual
A-2
118 Offset Constant Out Of Limits
119 Low F AC Constant Out Of Limits
120 %s Range Zero Out Of Limits
121 %s Range Shunt Offset Out Of Limits
122 Divide By 0 %s IA Update
123 Old %s IA Is Way Off! Do A DC Cal
124 Temperature Gain Is Zero!
125 New Temperature Zero Out Of Limits
126 Cal State Must Be Unsecured and in Service Mode
127 INPUT2 Correction Factor Out Of Limits
128 Calibration Step In Progress
129 Must Do Wideband Reference Correction First
130 Cable Calibration Failed
150 Calibration Procedure Complete
199 Cal Error Occurred; Already Reported
200-Level Faults: Hardware configuration
200 Need A %s To Do That
201 Need Wideband AC Option To Do That
202 IG Software Out Of Date: Use %s Or Newer
300-Level Faults: Inguard processor
300 A17 Guardcrossing: ROM Checksum
301 A17 Guardcrossing: RAM
302 A17 Guardcrossing: DUART
303 A17 Guardcrossing: Watchdog
304 Hardware Initialization
400-Level Faults: Self-diagnostics
400 %s
401 A16 DAC: Channel Ratio
402 %s
403 A15 A/D: Selftest
404 A15 A/D: %s Zero
405 A15 A/D: Null DAC %s