Fluke 6270A - External Isolation Valve

6270A
Operators Manual
60
External Isolation Valve
The isolation valve accessory isolates the Product from the external test port and
connects to DRV4.
Once installed, make sure to turn on the isolation valve function in the UI as
detailed in prior section.
The isolation solenoid is connected to a bracket that allows for the item to be
mounted in a variety of fashions, including:
• Tabletop
• Side rails of a standard rack system
• Shelf in a rack system
• Panel in a rack system
Connect the valve to the valve drivers on the Product. The length of the cable is
1.2 meters (4 feet) and is terminated to a connector that plugs directly into DRV4.
See Figure 19.