Fluke 718 30G - Standard Equipment; Safety Information

718 Series
Product Overview
2
Table 1. Input Units
Displayed Pressure Units
psi
inH
2
O at 4°C
inH
2
O at 20°C
cmH
2
O at 4°C
cmH
2
O at 20°C
bar
mbar
kPa
inHg
mmHg
kg/cm
2
Standard Equipment
The items listed below are included with your Calibrator. If
the Calibrator is damaged or something is missing, contact
the place of purchase immediately. To order replacement
parts or spares, see the user-replaceable parts list near
the end of this manual.
• TL75 test leads (one set)
• AC72 Alligator clips (one set)
• Holster
• 718 Series Product Overview Manual
• 718 Series CD-ROM (contains Users Manual)
Safety Information
Use the Calibrator only as specified in the Users Manual,
otherwise the protection provided by the Calibrator may be
impaired.
A Warning identifies conditions and actions that pose
hazard(s) to the user; a Caution identifies conditions and
actions that may damage the Calibrator or the equipment
under test.