1
Introduction
The 719PRO Pressure Calibrator (the Product) is a simple to use and versatile
pressure calibrator. Its internal pressure sensor and innovative electrically-
powered pump reach higher pressures (maximum 300 psi) and let the Product
calibrate virtually any pressure device. The Product features inputs for mA,
voltage, switch contacts, and an RTD probe. An external-pressure module option
gives a wider range of pressure calibration options that include absolute and
differential.
Contact Fluke
Fluke Corporation operates worldwide. For local contact information, go to our
website: www.fluke.com
To register your product, view, print, or download the latest manual or manual
supplement, go to our website.
+1-425-446-5500
fluke-info@fluke.com.
Safety Information
General Safety Information is in the Fluke Safety Information that shipped with
the Product or at www.fluke.com. More specific safety information is listed where
applicable.
A Warning identifies conditions and procedures that are dangerous to the user.
A Caution identifies conditions and procedures that can cause damage to the
Product or the equipment under test.
Specifications
Complete Product specifications are available at www.fluke.com. Safety
specifications are in the Safety Information that shipped with the Product.
Maintenance
See the Users Manual for maintenance items not detailed in this manual.
To Next Page
Loading...
