Fluke 805 FC - Power Saving; Flashlight; Accessory Connectors

Vibration Meter
How to Operate
13
To change the emissivity value:
1.
Go to the Device Settings menu.
2. Push  and  to highlight Material Emissiv
ity
.
3. Push
 to o
pen the menu.
4. Push  and  to highligh
t
a value.
5. Push
 t
o update the Meter an
d exit the
menu.
Power Saving
The Meter bypasses battery power when it is connected to
a PC with the USB cable. The Meter then uses the PC
power to extend its battery power.
Flashlight
The Meter has a built-in flashlight to illuminate the
measurement area on the machine. Push  to turn on
and off the flashlight. See Figure 2 for the location of this
button.
Note
Flashlight operation for extended periods of time
decreases battery life. Flashlight operation will
affect a temperature measurement.
gqi06.eps
Figure 2. Flashlight
Accessory Connectors
The Meter has three accessory connectors:
•
External
Sens
or
•
Audio (805 on
ly)
• USB
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com