Fluke 87 Series IV - Pushbuttons

Getting Acquainted
Pushbuttons
2
2-5
Pushbuttons
The buttons activate features that augment the function
selected with the rotary switch. The buttons are shown in
Figure 2-3 and described in Table 2-2.
Use the blue button ( %) to access functions labeled in
blue for some of the rotary switch positions. Table 2-1
defines all blue button functions.
Use the yellow button ( O) followed by other buttons
to access additional features. These features appear in
yellow above the appropriate keys. Table 2-2 defines
yellow button features. This manual identifies the yellow
button feature in parentheses following the button
sequence . For example, activating the FAST MN MX
mode appears as O M (FAST MN MX).
MIN MAXHOLD
REL
%
ms
Hz
RANGE
MIN MAXHOLD
REL
%
ms
Hz
RANGE
AutoHOLD
LOGGING
SAVECANCEL
FAST MN MX
SETUP
YES
NO
tc013f.eps
Figure 2-3. Pushbuttons
The following yellow button features are not available on
Model 87:
( YES), ( NO), (LOGGING), and (SAVE).