87V EX
Calibration Manual
16
Table 5. Error Messages
Error Messages
bAtt
Replace the battery immediately.
diSC
In the capacitance function, too much electrical charge is present on the capacitor
being tested.
EEPr
Err
Invalid EEPROM data. Have Meter serviced.
CAL
Err
Invalid calibration data. Calibrate Meter.
LEAd
WTest lead alert. Displayed when the test leads are in the A or mA/µA terminal
and the selected rotary switch position does not correspond to the terminal being
used.
To Next Page
Loading...
