8845A/8846A
Users Manual
3-26
0.5993
+
F1 F2 F3 F4 F5
caw034.eps
3. Press the CAL DATE soft key to display the date the Meter was last calibrated.
4. Press B to go back to the previous menu.
Note
UNLOCK CAL allows entry of a password so authorized personnel can
calibrate the Meter or change the (CAL) USER STRING.
Note
CAL USER STRING can be changed/entered after UNLOCK CAL. The
string also appears on the top line/row of the stored readings files.
Resetting the Meter’s Default Settings
To reset the Meter’s default settings:
1. Press I to see the instrument setup menu.
2. Press the RESET soft key to reset the Meter.
Note
Pressing the reset soft key will restore the Meter to the stored Power-up
configuration if defined, otherwise it will reset to the Meter factory default
settings.
To Next Page
Loading...
