Fluke 8846A - Appendix C Network Consideration; Your Meter and Your Network Administrator

Appendices
Example Adjustment Program B
B-3
PRINT @<address of meter>, "CAL:VAL ZRES,10"
PRINT @<address of meter>, “CAL? ON”
INPUT LINE @<address of meter>, A$
PRINT @<address of meter>, "CAL:REC"
## REAR CAL POINTS
PRINT @<address of meter>, "CAL:VAL ZRES,100000"
PRINT @<address of meter>, “CAL? ON”
INPUT LINE @<address of meter>, A$
PRINT @<address of meter>, "CAL:VAL ZRES,10000"
PRINT @<address of meter>, “CAL? ON”
INPUT LINE @<address of meter>, A$
PRINT @<address of meter>, "CAL:VAL ZRES,1000"
PRINT @<address of meter>, “CAL? ON”
INPUT LINE @<address of meter>, A$
PRINT @<address of meter>, "CAL:VAL ZRES,100"
PRINT @<address of meter>, “CAL? ON”
INPUT LINE @<address of meter>, A$
PRINT @<address of meter>, "CAL:VAL ZRES,10"
PRINT @<address of meter>, “CAL? ON”
INPUT LINE @<address of meter>, A$
PRINT @<address of meter>, "CAL:VAL ZVDC,1"
PRINT @<address of meter>, “CAL? ON”
INPUT LINE @<address of meter>, A$
PRINT @<address of meter>, "CAL:VAL ZVDC,0.1"
PRINT @<address of meter>, “CAL? ON”
INPUT LINE @<address of meter>, A$
PRINT @<address of meter>, "CAL:VAL ZIDC,100.0E-3"
PRINT @<address of meter>, “CAL? ON”
INPUT LINE @<address of meter>, A$
PRINT @<address of meter>, "CAL:VAL ZIDC,1.0E-3"
PRINT @<address of meter>, “CAL? ON”
INPUT LINE @<address of meter>, A$
PRINT @<address of meter>, "CAL:VAL ZIDC,10.0E-3"
PRINT @<address of meter>, “CAL? ON”
INPUT LINE @<address of meter>, A$
PRINT @<address of meter>, "CAL:VAL ZIDC,100.0E-6"
PRINT @<address of meter>, “CAL? ON”
INPUT LINE @<address of meter>, A$
PRINT @<address of meter>, "CAL:REC"
## FRONT CAL POINTS
PRINT @<address of meter>, "CAL:VAL ZIAC,0.0"
PRINT @<address of meter>, “CAL? ON”
INPUT LINE @<address of meter>, A$
PRINT @<address of meter>, "CAL:VAL ZIACS,0.0"
PRINT @<address of meter>, “CAL? ON”
INPUT LINE @<address of meter>, A$
PRINT @<address of meter>, "CAL:VAL ZIAC,1.0E-3"
PRINT @<address of meter>, “CAL? ON”
INPUT LINE @<address of meter>, A$
PRINT @<address of meter>, "CAL:VAL ZIACS,1.0E-3"
PRINT @<address of meter>, “CAL? ON”
INPUT LINE @<address of meter>, A$
PRINT @<address of meter>, "CAL:VAL ZIAC,10.0E-3"
PRINT @<address of meter>, “CAL? ON”
INPUT LINE @<address of meter>, A$