Using the OTDR Module
Looking at OTDR Test Results
7-35
7
Zooming the Trace
The zoom function lets you magnify the trace horizontally
or vertically.
To zoom the trace:
1
Press K Change to Cursor if necessary to set the
arrow keys to cursor mode.
2
Use BC to place the cursor near the feature you want
to magnify.
3
Press K Change to Zoom to set the arrow keys to
zoom mode.
4
Use BCAD to zoom the trace vertically and
horizontally.
The Event Table
To see a list of the events along the cabling, press J
View Events from the OTDR Results screen or the OTDR
Trace screen.
Figure 7-19 describes the features of the event table.
To Next Page
Loading...
