Fluke DTX-1200 - Page 392

DTX Series CableAnalyzer
Technical Reference Handbook
8
MDI/MDI-X, 11-8, 11-10
memory
features and functions, 13-1
specifications, 14-37
status screen, 13-2
memory card
capacity, 13-1, 14-37
care, 13-9
folders, 13-4
model features, 1-1, 14-11
modified 1 Jumper method, C-8
monitoring network traffic, 11-13
moving results, 13-7
MT-RJ, 8-18
–N–
n
loss/length test setting, 8-17
OTDR test setting, 7-19
N/A in LinkWare results, 3-13
negative loss
loss measurement, 8-10, 10-3
OTDR warning, 7-46
network service
blinking a port light, 11-15
connectivity results, 11-8
connectivity test, 11-4
diagnosing network problems, 11-17
ID locator, 11-15
module
features, 11-2
installation and removal, 11-2
software requirements, 11-1
monitoring network traffic, 11-13
ping addresses, 11-4
ping test, 11-11
PoE, 11-6, 11-8
specifications, 14-27
test settings, 11-4
NEXT
diagnosing failures, 6-6
HDTDX analyzer, 6-7
specifications, 14-16
test, 3-22
No Fiber, 7-41
No Signal, 7-41
noise. See impulse noise.
None, 1-32
Non-reflective Event Loss, 12-8
Number of Adapters, 8-15
Number of Pings, 11-5
Number of Splices, 8-15
Numeric Format, 1-27
NVP
changing, 12-10