Certifying Fiber Optic Cabling
Autotest in Far End Source Mode
8-39
8
Figure 8-18. Equipment for Testing in Far End Source Mode (1 Jumper Method)
amd51f.eps
A
Tester and smart remote with fiber modules and
connector adapters installed (match connector adapters
to the connectors in the link)
B
Memory card (optional)
C
Two AC adapters with line cords (optional)
D
Test reference cord. Match the fiber to be tested. SC
connector at one end. Match the link connectors at the
other end.
E
Test reference cord. Match the fiber and connectors in
the link.
F
Singlemode adapter of the appropriate type.
G
Mandrel. Recommended when testing multimode fiber
with DTX-MFM2 modules. See page 8-12.
H
Fiber cleaning supplies
I
A microscope for inspecting fiber connectors (the FT500
FiberInspector Mini Video Microscope is shown)
To Next Page
Loading...
