B-1
Appendix B: Modified Method B
This Appendix shows modified reference and test
connections that produce Method B results. Use these
connections if you need Method B results but do not
have connector adapters that match the connectors in
the fiber under test. This method lets you connect to the
fiber without disturbing the fiber modules' output
connections after setting the reference.
Figures B-1 and B-2 show reference and test connections
for a fiber with MT-RJ connectors.
To test links with different connectors at each end, see
the alternate method described in the Appendix of the
DTX Series CableAnalyzer Technical Reference Handbook
or visit the Fluke Networks Knowledge Base for
suggestions
To Next Page
Loading...
