Industrial ScopeMeter®
Scope and Meter Mode
3. Push to highlight A in the Trigger Input group. 8. Push to close all menus.
4. Use YZ to highlight the Update as On trig.
Note
Setting the automatic triggering to >1 Hz will
5. Push to make the change.
slow down the auto range.
6. Push 4 to accept all trigger selections and return
The Information area updates with:
to normal measurement.
Wait
no trigger found
To autorange on signals down to 1 Hz:
ON TRIGGER
screen updates only when valid
1. Push to open the MENU.
triggers occur
2. Use
YZ to highlight USER OPTIONS.
Note
3. Push to open the USER OPTIONS MENU.
Gray text in a menu or button bar indicates that
4. Use
YZ to highlight Autoset Settings.
the function is disabled or the status is not valid.
5. Push to open the USER > AUTOSET MENU.
6. Use
YZ to highlight the Search For Signals as
> 1 Hz.
7. Push to make the change.
31
To Next Page
Loading...
