Fly Products Rider Series - User Manual

ASSEMBLY MANUAL
MANUALE ASSEMBLAGGIO
V. 2.09

Summary

Frame and Cage Assembly

Cage Assembly Completion and Double Cage Option

Finalizing cage assembly and specific steps for the double cage version.

Harness Mounting and Initial Settings

Harness Plate and Push-pin Attachment

Attaching the harness to the plate and locking with the push-pin.

Correct Push-pin Operation

Harness Strap and Rope Connections

Optimal Setup Adjustments

Harness Height Adjustment for Take-off

Simulator Setup and Inclination Testing

Setting up for simulation and testing inclination between 25° and 30°.

Paramotor Pivotarm Adjustments

Pilot Weight Adjustment (Setting N.1)

Adjusting hooks forward/backward for pilot weight.

Pilot Size Adjustment (Setting N.2)

Adjusting the arm/support for pilot size (XS, S, L).

Torque Adjustment (Setting N.3)

Adjusting contrast to propeller torque based on engine reduction type.

Torque Counteraction with Supports

Propeller Installation Guide

Mounting on Belt Reduction Motors

Mounting on Mechanical Reduction Motors

Securing Propeller Bolts Sequence

Multifunction Throttle Operation

Fly Products Rider Series Specifications