The reason for which the indicator light turns on can be:
- Problem on injection system
- ECU malfunction
- Engine over heating
The FNM
®
authorized service point must make an immediate diagnosis.
Water in fuel
indicator light
Indicates normal operation
The indicator light may turn on for:
- Water presence in the fuel filter
- Malfunction of the water in fuel sensor
Check and drain the fuel filter. If the problem persists, make a diagnosis
by an authorized FNM
®
service point.
Transmission oil
anomaly indicator
light
Indicates normal operation
On, stern drive or gearbox
installations
Indicates the low level of oil in the transmission. Check and fill the
transmission system with proper lubricant, then turn on the engine
again. If the problem persists, contact an authorized FNM ® service
point.
On, saildrive installations
Indicates leakage of seawater from the saildrive seals. Check the seal
status.
To Next Page
Loading...
Need help?
General
