FNM HPE Series User Manual

FNM
®
HPE Series 37
Meaning of the indicators on the digital panel- on page 115.
2.2.4 Setting Mode
The setting mode allows you to set all the parameters of the instrument.
In normal mode pressing simultaneously the Mode button and the up arrow button allows
you to enter the Setting mode.
Pressing the Mode button or staying for more than 40 seconds in the Selection mode without
pressing any key makes it return to Normal mode.
In Setting mode, the arrow keys and can be used to display alternative screens containing
other functions that allow you to set the instrument
To enter a function press and hold the arrow keys and simultaneously for at least 2 seconds.
Use the same key combination to give a confirmation, and the Mode button to go back.
The functions which can be modified on the instrument are shown in the figure below. For more
information consult the manual of digital instrument (available also on the website www.faria-
instruments.com).

FNM HPE Series Specifications

General

Brand	FNM
Model	HPE Series
Category	Engine
Language	English