FNM HPE Series User Manual

FNM
®
HPE Series 39
2.3 First engine starting and sea trial
2.3.1 Checks and preliminary operations
Follow the directions before starting the engine for the first time.
It is preferable and highly recommended to follow the directions together with your installer.
1. Check the weather conditions, do not put into the sea if the sea is too rough or bad weather is
forecasted.
2. Make sure you have carefully read this instruction manual. The information contained in it will
be useful in the management of your engine.
3. Check the fuel supply line and the presence of any leaks. Be careful to avoid sharp bends or
kinks along the fuel supply line. Also be sure that the line is clean and free of air bubbles.
4. Verify if you need to lubricate or grease the pinion of the starter and transmission couplings.
5. Check and verify the correct installation of electrical connections.
Wrong connection may cause short circuits and cause damage to persons and to the
engine.

FNM HPE Series Specifications

General

Brand	FNM
Model	HPE Series
Category	Engine
Language	English