FNM HPE Series User Manual

FNM
®
HPE Series 47
It is now possible to start the engine (position II).
2. Start the engine
Turn and hold the key in position (II) and release immediately when you hear that the engine
starts.
Figure 17 - Hold the key to position II until the engine starts.
Avoid the engine starter overload; release the key after max 5 sec. if engine doesn’t start.
Repeat the operation if necessary.
The digital instrument sometimes (as in the case of low battery voltage) can redo the test mode.
3. Engine functioning
While the engine is running (in normal functioning conditions) all the lights and the buzzer must
be OFF.

FNM HPE Series Specifications

General

Brand	FNM
Model	HPE Series
Category	Engine
Language	English